Roadtrip Setup Guide

Use Roadtrip's speaker

Condition: Your phone is connected to Avantree Roadtrip and the switch is at ON.

1. Play audio or make a test call on the phone.
2. Rotate Roadtrip's knob to a comfortable volume.
3. Adjust the phone volume if needed.

Done: You hear the phone through Roadtrip's built-in speaker.

If not: Check the phone's Bluetooth audio output and see quick help.

Use your car's FM radio

Condition: Your phone is connected to Avantree Roadtrip, and the car radio receives FM.

Choose a clear channel on the car radio first. Then match Roadtrip to that channel.

1. Slide Roadtrip's OFF/ON/FM switch all the way to FM (the rightmost position).

   

2. Tune the car radio to an unused FM frequency.

   Check: Listen for steady static, not a station or voices.

   Tip: Try below 90.0 MHz or above 107.0 MHz, within Roadtrip's 88.1–107.9 MHz range.

3. Rotate Roadtrip's knob until its displayed FM frequency exactly matches the car radio.

4. Play audio on the phone.
5. Adjust the phone, Roadtrip, and car-radio volumes if needed.

Done: You hear phone audio from the car speakers without a radio station in the background.

If not: Check that the frequencies match. If you hear a station, see FM quick help and choose another clear channel on the car radio. Then match Roadtrip again.