VERSAND
2–5 Werktage. Kostenlose Rücksendung innerhalb von 60 Tagen mit vorfrankiertem Etikett auf Anfrage.
HearCoil | Wired T-Coil Neckloop for Hearing Aids
Connect any receiver with a standard 3.5 mm audio output to telecoil-enabled hearing aids using this simple wired neckloop. Wear HearCoil around your neck, plug it into the receiver, and switch your hearing aids to an enabled T or MT program.
Regulärer Preis
$69.99
- Made for T-Coil Hearing Aids: Sends audio from a connected receiver to telecoil-equipped hearing aids using an enabled T or MT listening program.
- Works with Standard 3.5 mm Receivers: Compatible with receivers and listening devices that provide a working 3.5 mm audio output.
- Recommended with AuraClip and AuraView: Pair with the Avantree AuraClip VRC-240 or AuraView VRC-250 for a complete Avantree listening setup.
- Simple 3-Step Setup: Plug HearCoil into the receiver, wear the loop around your neck, and switch your hearing aids to T or MT mode.
- No Buttons or Charging: HearCoil has no battery or on-device controls. Adjust volume on the receiver or your hearing aids.
Audio source or Auracast broadcast → compatible receiver with 3.5 mm audio output → HearCoil wired neckloop → T-coil hearing aids.
• One HearCoil wired neckloop
* Receiver and hearing aids are sold separately
* Receiver and hearing aids are sold separately
In Stock—Estimated delivery
3–7 business days
$69.99
Specifications
| Product Type | Wired T-coil neckloop |
| Connector | 3.5 mm audio plug |
| Hearing Aid Compatibility | Telecoil-enabled hearing aids using an enabled T or MT program |
| Receiver Compatibility | Compatible equipment with a working 3.5 mm audio output; recommended with AuraClip VRC-240 and AuraView VRC-250 |
| Volume Control | Adjust on the receiver or hearing aids |
| Power | Passive wired accessory; no battery or charging required |
Before You Buy
Your hearing aids must contain a telecoil and have an enabled T or MT listening program. Some telecoil-equipped hearing aids do not show this program until it is enabled by a hearing care professional.
Q & A
Q1: Will HearCoil work with my hearing aids?
A: It works with hearing aids that have a telecoil and an enabled T or MT program. Hearing aids without telecoil support are not compatible.
Q2: Which receivers can I use?
A: Use a receiver or listening device with a working standard 3.5 mm audio output. AuraClip VRC-240 and AuraView VRC-250 are recommended, but HearCoil is not limited to those models.
Q3: My hearing aids support T-coil, but I cannot find T or MT mode. What should I do?
A: Contact your hearing care professional or audiologist. The telecoil program may need to be enabled or added to your hearing aids.
Q4: How do I set it up?
A: Plug HearCoil into the receiver’s 3.5 mm audio output, wear the loop around your neck, and switch your hearing aids to T or MT mode.
Q5: How do I change the volume?
A: HearCoil has no buttons or volume controls. Adjust volume on the connected receiver or on your hearing aids.
Q6: Does it need batteries or charging?
A: No. HearCoil is a passive wired accessory and does not contain a battery.
Looking for Venue Event Devices?
You are probably looking for
Venucast
— Assistive Listening, Instant Venue Audio & Guided Tour Systems.
Assistive Listening
Instant Venue Audio
Guided Tour
- Die Auswahl einer Auswahl führt zu einer vollständigen Seitenaktualisierung.