Auracast listening
Choose how to listen, join a nearby broadcast, then confirm you hear audio.
Step 1
Select your listening device.
Step 2 · Hearing aids
Select how your hearing aids receive audio.
Join from your hearing-aid app or brand guide.
Choose your brand →
You can hear music from your phone through your hearing aids
You can switch your hearing aids to “T” or “MT”
Look for a T or MT setting in your hearing aid app or paperwork. If you cannot find one, ask your hearing care professional.
Step 3 · Direct Auracast
Open your brand guide for exact steps.
Other ways to listen
Aura C phone hearing aids
Aura C does not pair directly with hearing aids.
Set up Aura C →Switch to T or MT. The neckloop sends the broadcast to your hearing aids.
AuraCoilBuilt-in neckloop
Set up AuraCoil →AuraClipNeeds a compatible 3.5 mm T-coil neckloop
Set up AuraClip →Products
Open the product page for setup.
Quick help
Open a symptom. Try each step in order.
Possible cause: The device may be out of range or scanning for normal Bluetooth.
Done: The broadcast name appears.
If not: Check compatibility, then open the brand or product guide.
Possible cause: The wrong broadcast may be selected, or volume may be low.
Done: Audio plays through your device.
If not: Restart the device and repeat its brand or product guide.
Possible cause: You may be near the edge of the broadcast area, or another stream is active.
Done: Audio stays stable.
If not: Contact support with the device model and broadcast name.
Possible cause: TV speakers and Auracast audio may arrive at different times.
Done: Voices no longer arrive twice.
If not: Use one audio path or contact the TV manufacturer.
Reference
Supported: The exact listening-device model supports Auracast.
Not this: Do not use normal Bluetooth pairing to find an Auracast broadcast.
Still need help?
Was this helpful?
